How To Create WiFi Hotspot In Windows 7 Using Command Prompt

 Command : netsh wlan set hostednetwork mode=allow ssid=yourname key=yourpassword

Note: Enter the name of wifi instead of  your name (ssid) and wifi password instead of yourpassword (key) .Please make sure Password must be greater than 8 digits.


You have successfully established the Network Connection.

Sept 3:  Type following command to Start your hosted network (WifiHotspot).
Command : netsh wlan start hosted network

Note: Make sure to turn on the “WiFi” and also enable the Wireless Adapter other wise Command Prompt may says ” your hosted network couldn’t be started ”.


Hey now it's time to Share your Wireless Network Adapter here or some following  steps. 

Share your Wireless Network Adapter 

Step 1:  Open control Panel -> Network and Internet and select Network and Sharing Center.

Step 2:  This window you can see your created network under the original network connection.

Step 3:  Click on  “Change adapter settings” in the left side column of Network and Sharing Center.

Step 4:  Right click on your Wireless Network Adapter and click on properties. Click on “Sharing“ tab. Check the option “Allow other network users to connect through this internet’s connection” option. Mention your newly created hosted network name.

Step 5:  you can check hosted network has shared the network access or not from the Network Sharing and Center

Now you can access computer/Laptop Network from you mobile or other device using wifi.